Rope-operated lopping shear, equipped with double pulley sliding system to enable the rope to move back and forth quickly.
Made entirely of steel, a feature that makes this tool indestructible.
Reversibility of blade and cutting system.
The lopping shear can be used in combination with STA-FOR telescopic poles, from 3 m to 6 m. Assembly: to fit the lopping shear onto the pole: take the wooden adapter off of the pole and put in – if necessary – the plastic adapter supplied with the lopping shear.
POLE TREE PRUNER, LIGHT MODEL, WITH ADJUSTABLE BLADE
Possibility to change blade position to achieve push or pull cutting mode. Pulley with double rope thread to promote sliding and reduce pulling force. Blade opening for cutting width up to ø 35 mm. Its special lightness and handiness makes it suitable for protracted work.
CONFIGURATION A, pull cutting system: the action of the blade, which is placed above the branches, cuts on the pull.
CONFIGURATION B, push cutting system: the action of the blade, which is placed under the branch, cuts on the push. Also in this case the blade in its resting position remains protected by the blade-protector guard.
(31 cm / 12.20")
|R1121 – Adapter dia28-25 for adaptation to poles cod.303-304-306|
|R1103 – Counter-blade pin|
|R1102 – Screw and nut for blade|
|R1101 – Spring|
|R1100 – Counter-blade|
|R1099 – Blade|
|R1097 – Cord mt.5|
|R1096 – Nylon pulley|
|R1095 – Pulley bush|
|R1022 – Nut-locking plate with screw|
|Set 1319 (Includes R1102, R1103, R1022, R1095 x pcs.4 and R1096 x pcs.4)|